SX-5 SCALE REMOVER
$168.40 – $2,150.50
Scale Remover
Safely Removes Scale, Heavy Slime and Algae from Cooling Towers, Pipes and Condensers. SCALE REMOVER is safe on paint, wood and commonly used metals. (Do not use on galvanized surfaces).
- Reduces Head Pressure
- Increases System Capacity
- Reduces Power Consumption
- Labor Saving
Directions
Add SCALE REMOVER to the sump and it will reduce head-pressure in a matter of a few hours. Because SCALE REMOVER contains no harsh acids, it can be left in the water system for 24 to 48 hours, allowing time for other duties while the system is being cleaned.
Add 3 gallons of SCALE REMOVER for each 100 gallons of circulating water. (The amount of water in the system can be estimated by multiplying the sump length X width X depth in feet and multiplying by 10). Allow system to operate normally for 24 to 48 hours with the bleed line turned off, then drain the entire system. For systems that cannot be drained after SCALE REMOVER treatment, increase the bleed off rate 2 or 3 times normal rate to dilute unused SCALE REMOVER.
Additional information
| Weight | 50 lbs |
|---|---|
| Dimensions | 13.25 × 13 × 13 in |
| Select Container Size: | Gal. Rounds 4101-01, Pails 4101-05, Pails 4101-T5 (Tower Safe), 30 Gal. Drum 4101-30, 30 Gal. Drum 4101-T30 (Tower Safe), 55 Gal. Drum 4101-55, 55 Gal Drum 4101-T55 (Tower Safe) |
